这些粉末包装机的操作的预防措施

每个价格粉末包装机更贵，所以你需要在使用它时要特别注意，否则可能会造成损坏设备。一些看似简单的操作实际上可以对设备造成很大损害。今天的编辑将专注于需要注意粉末包装机的事项。让我们给我们一个解释并希望帮助我们。

　　 1. Set the parameters of each part according to the powder packaging machine manual to ensure the accuracy of packaging after the start of the operation.

　　 2. In the powder packaging machine packaging process, the operation of each process must be carried out in strict accordance with the standard.

3.当自动粉末包装机包装时，如果有泄漏现象，请不要将称重秤放在称重平台上，否则，电脑将认为一次性消隐的精确数据已被调整为影响随后的连续操作精度和速度;

　　 4. If there is any foreign matter found in the mouth of the material cup during the operation, the machine should be shut down and taken out. Note: Do not hold foreign objects with your hands before shutting down to avoid damage to the body caused by the rotation of the photoelectric spiral.

　　 5. When replacing and cleaning the cup screw, it is strictly forbidden to swing the screw horizontally to avoid breaking the screw slot in the next operation and affecting the measurement accuracy of the screw and the cup. When disassembling, it can be moved up and down to gradually disassemble. When the spiral is difficult to disassemble, the long shaft can be loosened and the spiral can be disassembled together.

　　6. Do not place heavy objects on the sensor and cannot sit down. The maximum load capacity shall not exceed the maximum weighing scale. Do not allow the sensor to be close to a larger seismic source, otherwise it will affect the accuracy of the sensor.

7.在更换垫圈时，润装器需要注意两种垫圈的厚度，方向和方向。张紧轮的底板必须窄向内，并且垫圈的取向是基于可移动链轮的方向的最佳状态。调整其上下位置。